MT79 Title Camera ID PCB
The MT79 accepts a video input and can display up to
79 different titles from memory on the video picture. Each
title can consist of up to 10 alphanumeric characters,
independent on-screen position and gray scale. The title can be
programmed from the front panel controls or by RS-232
commands. The displayed title can be selected via 8 bit parallel
or RS-232 commands. In the 8 bit parallel mode, 7 bits are
used for title selection, the 8th is an enable bit. This enable
bit allows for cascading any number of MT79s for
increased titling capability. This product can easily add camera titling
to older matrix or stand alone switchers.
|
MT-79 Camera Titler
|
VSI-ADD Addressable
The VSI-ADD requires an addressing command to enable the unit to listen to text insertion commands from a host controller. This enables many VSI-ADDs to be connected in parallel on one RS-232, RS-422, or RS-485 data link and be controlled by one or more host controllers. An internal dipswitch sets the address which allows up to 255 units to be on a single node. All the standard commands are available on the VSI-ADD similar to the standard VSI. See VSI section for detailed specifications.
|
VIDCNT- Video Counter
The VIDCNT contains a Time/Date generator along with a 3 or 7 digit
on-screen counter. This counter is incremented or decremented by a contact closure to
ground with a 200ms debounce. The count can be reset by front panel controls. The T/D
is battery backed for 90 days. The on-screen position, gray scale will revert to the
factory default upon power loss and the count will be reset to zero. The VIDCNT 7 is
available in a 5ms debounce for counting fields of video or other high speed signals.
|
On-screen T/D counter |
VSI+ Mouse
The VSI+Mouse is a powerful on-screen pointing device for all
types of medical, industrial and security uses. The small compact
unit supports connection to any standard PC Mouse. The included
gender changer allows for a direct connection to the rear of the
VSI+Mouse. On-screen titling and cursor positioning is achieved via the
buttons on the mouse with on-screen interaction. The cursor can be
quickly changed from an arrow to a box by simple mouse controls.
Cursor positioning can be achieved anywhere on-screen via
block positioning.
|
Features
- Nine Types of Cursors
- Adjustable Mouse Resolution
- Adjustable Block Positioning
- Selectable Cursor Gray Scale
- On-screen titling
|
On-screen display |
Optional Mouse and Gender Changer |
AVE Thailand Co., LTD.
147 Soi OnNut44, (Sampheenong Villa), Sukhumvit 77Rd., Suanluang, Suanluang, Bangkok 10250 Thailand.
Tel: +662 331 9285 ,+662 331 9364 and +662 742 0221
Fax: +662 331 9365 Mobile: +81 838 6805
Email: ave@avethailand.com